exmoorfurniture@btconnect.com

Tel: 07841427092

UK Delivery- ask for a quotation

 

Sink Units

 

 

The Free-standing Sink Unit.

Solid Pine Free-standing Kitchen Sink Unit. Handmade Using Sustainable Timber.  Painted Unit in Farrow and Ball, Little Greene Paint Company or Fired Earth Paint.

925mm High.

Various mm Wide.

650mm Deep.

 

The sink units a range of Belfast sinks and 40mm hardwood tops or 25mm slate / granite tops with drainage grooves machined to the left or right hand side of the sink.

Our freestanding kitchen sink unit doors are made with a square moulded frame and a raised fielded panel. There is an adjustable shelf in the middle of the door sections.  The sides have the same moulded panels as the doors. The back, which will be against a wall, is tongue and groove boards. The cupboard below the sink is left free of shelves to allow for the waste to be plumbed in. 

The base is 650mm wide with the top on,  which will fit through most doorways. Please check the size of your doorways before ordering. The top can easily be unscrewed.

The 40mm wooden worktops and door knobs are given three coats of a liquid wax oil; this gives a waterproof and hard wearing finish.

Other sizes and styles are available; please email us with your questions. Beech, Oak, Ash, Iroko, Cherry and Walnut worktops are available at various prices, please ask for a quote. 

 

The price for this 1850mm wide sink unit with a slate top is £2100 and the price for the unit with the stainless steel Belfast sink and Iroko top is £1915.

Below are many variations on this theme, please email us for a quote and provide us with your postcode for an accurate delivery cost.

 

 

The Free-standing Sink Unit with Appliance Overhang.

Solid Pine Free-standing Kitchen Sink Unit. Handmade Using Sustainable Timber.  Painted Unit in Farrow and Ball, Little Greene Paint Company or Fired Earth Paint.

925mm High.

Various mm Wide.

650mm Deep.

 

The sink units a range of Belfast sinks and 40mm hardwood tops or 25mm slate / granite tops with drainage grooves machined to the left or right hand side of the sink.

The worktop overhangs to allow a washing machine or dishwasher to be placed next to the sink to share the waste water outlet.  The overhang can be on either side. The top would need to fixed to the wall with brackets and screws.

Other configurations are possible, please email us for further details.

 

The prices for these sink units vary due to size, worktop, sinks and taps etc... Please email us for a quotation and include your postcode for a delivery price.